EFS 50

The EFS 50 is a semi-automatic filling machine with two different valves (over- & below level valve) for the accurate filling of viscous to pasty liquids, e.g. paints, varnishes, adhesives, bitumen or similar products. In this case the system is used for the above level filling of conventional types of containers, e.g. cans, buckets and other open containers.

On the other hand, the filling plant serves for filling liquids, which, owing to their properties, make a below—level filling mandatory.

This type of filling is necessary when liquids which have the tendency to foaming liquids, are gaseous or generate static electricity, e.g. solvents, detergents / cleaning and car products, chemical liquids, mineral oils, glazes or similar products. In this case, the system is used for the below level filling of conventional bunghole containers, e.g. canisters or other containers.

Product feed from higher lying storage tanks via gravity or with the help of pumps.

The machine offers you fast changing of valve types:

  • calibratable above level filling
  • Thread-cutting, non-dripping filling valve
  • an nearly foam free, calibratable below level filling
  • fast cleaning of the valve (the product-contacted area consists of 3 parts)
  • a rapid changeover to other container sizes and changing products
  • the ideal solution for small and medium filling orders
  • simple operation by one person
  • filling capacity up to 10 containers per minute
    (depending on the type of filling)
  • small space requirement
  • immediately ready for use, only energy (electricity and/or compressed air only) and product supply must be connected and  filling can be started


  • 100 g – 15 kg
Dimensions max.1,600 x 1,000 x 1,900 mm (WxDxH)
Weight~ 155 kg
Compressed air demand per filling~ 6 NL at 5.5 bar

Also available with explosion protection label according to directive 2014/34/EU.


Further plants

Convince yourself of FRICKE quality